PT09 Linear Actuator: 6000N, 600mm Stroke
Review PT09 flat-push specifications for DC 29V, up to 6,000N thrust, 6–40mm/s speed, 10–600mm stroke and installation dimensions.
PT09 Linear Actuator
A 29V flat-push motion unit with a sliding-block and track-style package. Its published envelope reaches 6,000 N maximum push, 6–40 mm/s speed and 10–600 mm stroke. The real project still needs a checked working load, loaded speed and installation envelope.
Start with the working load.
Treat 6,000 N as a published maximum, not proof of maximum force at maximum speed.
Specifications stay visible while the active engineering state moves with you.
Switch Force / Loaded speed / Travel above and the matching evidence row is highlighted here. This is a reading aid, not a generated performance curve.
| Parameter | Published PT09 value | Selection note |
|---|---|---|
| Supply voltage | DC 29V | Confirm the project power architecture before release. |
| Maximum push | Up to 6,000 N | Maximum value; loaded operating point must be reviewed. |
| Speed | 6–40 mm/s | Published range; loaded speed is not defined by the local data. |
| Stroke | 10–600 mm | Select the required travel from the real motion requirement. |
| Duty cycle | 10% | The local source does not define the test time basis. |
| Minimum installation dimension | ≥144 mm | Check package space against the mechanism geometry. |
| Pin hole diameter | Ø10 mm | Confirm mating pin and bracket geometry. |
Click a dimension and move the inspection focus across the drawing.
The marker is a visual locator only. Use the released drawing to control machining, bracket fabrication and tolerance decisions.
Factory media is evidence context, not decoration.
This first-party image shows a ServoCylMotion production environment. It does not by itself prove a PT09-specific process step, certification status or inspection frequency.
Choose the package from the mechanism, not from a single headline number.
PT09 is a candidate when the project can use DC 29V, needs a flat-push track package, requires 10–600 mm travel and has enough space for the published installation envelope.
Published ranges support screening; configuration data governs release.
Use the page to narrow the candidate, then confirm the real mechanism and controlled documentation.
Can PT09 deliver 6,000 N at 40 mm/s?
The local data does not provide a force-speed table, so that combination should not be assumed. Submit the working load and required loaded speed for review.
What stroke range is published?
The local PT09 record lists 10–600 mm.
What voltage does PT09 use?
The published local value is DC 29V.
What duty cycle is listed?
The local record lists 10%. The current source does not define the test interval or run/rest basis.
